Pilotsoft
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Уважаемые господа!
Подскажите, пожалуйста, чем и как исправить проблему. Купил новый системный блок с 80 Гб винтом. При покупке в WinXP показали, что винт 80 Гб. Винду снесли. Я попросил поставить свой старый IBM 30 Гб в качестве Мaster, а новый - Slave (при этом в магазине меняли положение джамперов на новом харде, но вроде бы вернули в прежнее положение). Дома, естесственно, пришлось переставить систему, т.к. сходу Win2K все новое оборудование не обнаружил и запускаться не хотел. После переустановки системы ткнул на диск D (новый). Система сказала, что винт не форматирован. Форматнул. Теперь он наглухо 33,8 Гб. После этого глянул в BIOS и там тоже самое. Инфа от Norton PartitionInfo
===========================================================================================================
Disk Geometry Information for Disk 2: 65531 Cylinders, 16 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
===========================================================================================================
0 0 63 368 111 45 07 371 101 51 218,129,5091,701,990,410
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 63 216398 5 11 07 1904880 13 60 2181295091701990410
Warning: Partition boot flag expected to be 0x00 or 0x80,
not 0x63. This should not be a problem.
Error #107: Partition begins after end of disk.
ucBeginCylinder (216398) must be less than 65531.
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 5.
Error #106: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 11.
Error #109: Partition ends after end of disk.
ucEndCylinder (1904880) must be less than 65531.
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 15, not 13.
Error #108: Partition didn't end on cylinder boundary.
ucEndSector expected to be 63, not 60.
0 1 73 67 115 32 74 299 114 44 729,050,177 543,974,724
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 73 723264 1 3 74 1262921 8 29 729050177 543974724
Warning: Partition boot flag expected to be 0x00 or 0x80,
not 0x73. This should not be a problem.
Error #107: Partition begins after end of disk.
ucBeginCylinder (723264) must be less than 65531.
Info: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 3.
Error #109: Partition ends after end of disk.
ucEndCylinder (1262921) must be less than 65531.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 15, not 8.
Info: Partition didn't end on cylinder boundary.
ucEndSector expected to be 63, not 29.
0 2 74 114 111 32 65 353 115 52 168,653,938 0
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 2 74 167315 6 41 65 167315 6 40 168653938 0
Warning: Partition boot flag expected to be 0x00 or 0x80,
not 0x74. This should not be a problem.
Error #107: Partition begins after end of disk.
ucBeginCylinder (167315) must be less than 65531.
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 6.
Info: Partition didn't begin on head boundary.
ucBeginSector expected to be 1, not 41.
Error #109: Partition ends after end of disk.
ucEndCylinder (167315) must be less than 65531.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 15, not 6.
Info: Partition didn't end on cylinder boundary.
ucEndSector expected to be 63, not 40.
Info: This partition unexpectedly contains no sectors.
===========================================================================================================
Partition Information for Disk 2: 32,253.5 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects
===========================================================================================================
Unallocated Pri 32,253.5 None -- 63 66,055,185
Unallocated Pri 50,097.0 None -- 66,055,248 102,598,690
NetWare Pri,Boot 0.0 0 2 168,653,938 0
Unallocated Pri 24,157.5 None -- 168,654,528 49,474,656
QNX, UN*X Pri,Boot 831,050.0 0 0 218,129,5091,701,990,410
Info: MBR Partition Table not in sequential order.
Type 74 Pri,Boot 265,612.7 0 1 729,050,177 543,974,724
Error #113: Primary partition starting at 729050177 overlaps previous partition.
Подскажите, пожалуйста, это поправимо или как? Мать - ASUS P4VP-MX. BIOS перепрошил до 1010. Система - Win2K SP4. Винт - ST380011A |
Всего записей: 102 | Зарегистр. 26-02-2004 | Отправлено: 05:18 12-02-2005 | Исправлено: Pilotsoft, 05:32 12-02-2005 |
|
), 
