Выбор оперативной памяти - [99] :: Выбор комплектующих

День добрый! Приобрёл память PC2-9600 1200MHz DDR2 DIMM Kingston HyperX [KHX9600D2K2/2G] 5-5-5-18
Мать Gigabyte GA-X48-DQ6 S775
Сейчас работает при 1.89в 6400, 5-5-5-15...
Хотелось_бы поставить на требуемые частоты (1200\9600) , т.е.поднять так понимаю напряжение до 2.3в -2.35в. Подскажите так ли надо сделать:
В биосе:******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages. Auto lets BIOS automatically set the
system voltages as required. Manual allows all voltage control items below to be configurable.
(Default: Manual)
DDR2 OverVoltage Control
Allows you to set memory voltage.
Normal Supplies the memory voltage as required. (Default)
+0.05V ~ +1.55V Increases memory voltage by 0.05V to 1.55V at 0.05V increment.
Note: Increasing memory voltage may result in damage to the memory.
PCI-E OverVoltage Control
Allows you to to set PCIe voltage.
Normal Supplies the PCIe bus voltage as required. (Default)
+0.05V ~ +0.75V Increases PCIe bus voltage by 0.05V to 0.75V at 0.05V increment.
FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal Supplies the FSB voltage as required. (Default)
+0.05V ~ +0.35V Increases FSB voltage by 0.05V to 0.35V at 0.05V increment.
(G)MCH OverVoltage Control
Allows you to set the North Bridge voltage.
Normal Supplies the North Bridge voltage as required. (Default)
+0.025V ~ +0.375V Increases North Bridge voltage by 0.025V to 0.375V at 0.025V increment.
Loadline Calibration
Enabled Lets the BIOS fine-tune the CPU Vcore voltage. (Default)
Disabled Disables this function.
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.

Т.Е. в разделе DDR2 OverVoltage Control поднять от значения 1.55V (прибавить к нему) такое (+0.05V ~ +1.55V) чтобы получить 2.3- 2.35в.
Так ли это??? Или от значения 1.8в??? На старой памяти напряжение в авто стояло 1.8в, сейчас в Авто стоит 1.89в.!

Модерирует : Akam1, Dr_StandBy, vertex4
Dr StandBy (17-12-2008 20:12): http://forum.ru-board.com/topic.cgi?forum=67&topic=0898	Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101