LexVel
Platinum Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
Alukardd
Да верно, прокси сервер это немного не то.
У меня DNScrypt,
Цитата:
The proxy will accept incoming requests on 127.0.0.1, tag them with an authentication code, forward them to the resolver, and validate each answer before passing it to the client.
Given such a setup, in order to actually start using DNSCrypt, you need to update your /etc/resolv.conf file and replace your current set of resolvers with:
nameserver 127.0.0.1
|
https://www.wireshark.org/download/win64/
Wireshark is the world's foremost network protocol analyzer, and is the de facto standard across many industries and educational institutions.
http://filehippo.com/download_wireshark_64/10573/
Цитата:
start it from a terminal with wireshark 1.6.2 (you need to be sudo to be able to listen to your network card.)
Wireshark is the world's most popular network protocol analyzer.
It is used for troubleshooting, analysis, development and
education. |
так смогу понять что происходит...
Цитата:
You could check it with Wireshark by listening to your network card, just follow these steps:
sudo apt-get install wireshark (paste it into a terminal)
start it from a terminal with sudo wireshark (you need to be sudo to be able to listen to your network card.)
then start listening and filter out everything but your own ip.
Now just check if the dns protocols are encrypted.
use the filter to only show dns
Stop the scan.
click on a list item that says dns and comes from your ip.
Now click on the transmission protocol to see if it's encrypted.
|
----------
Sony VAIO VGN-Z11XRN/B Intel® Core™2 Duo P9700 Enhanced Intel SpeedStep® / 8192Mb /Intel 320 Series SSD 300GB/ DVD-RW / TFT 13.1" 1600x900 / Wi-Fi |
|
Всего записей: 10102 | Зарегистр. 24-04-2007 | Отправлено: 23:24 27-02-2015 | Исправлено: LexVel, 23:29 27-02-2015 |
|
за команду она работает. (если менять конф прокси, то стоп и старт сервера)