SpeedFan - [1] :: Программы :: Компьютерный форум Ru.Board

SpeedFan 4.06
http://www.almico.com/speedfan406.exe

changed detection routine for MAX1617
- properly detected and handled SiS961
- completely rewritten the configuration file. This is a major update I've been working on for a long time. This new configuration file properly handles computers where hardware monitoring devices appear and disappear and/or are swapped out (like S.M.A.R.T. HDDs).
You should consider deleting SPEEDFANSENS.CFG before running this new release.
- refined the configuration file: now it stores advanced properties set in the configuration dialog (ADVANCED tab)
- ADVANCED configuration supports IT8712F temperature sensors mode
- ADVANCED configuration supports IT8693F, IT8702F and IT8712F fan divisors
- added full support for W83637HF
- slightly revisited S.M.A.R.T. window to better show info reported by HDs with a lot of attributes
- S.M.A.R.T. attributes are now shown with an icon telling the status of individual relevant attributes (STOP below 10%, WARNING below 40% and OK otherwise). Other attributes are only informative and an icon has no reason to be

- added support for SIS645DX (the one on ASUS P4S533)
- fixed MTP008 PWMs and voltages readings
- added full support for SIS650
- fixed hibernation support
- added MAX6650 PWM support
- properly handled reversed logic PWM used on IT8712F
- added full support for ADM1032
- added a button (INFO tab) to find SMBus devices: this might be useful to search for CLOCK chips and if I need to know more about your motherboard

- the results from FIND SMBUS DEVICES are added to the usual REPORT
- changed the way INTEL 82801 SMBus access is enabled if the BIOS didn't do it for you
- added full support for Intel ICH-4
- added full support for ADM1028
- verified MAX6657 detection
- fixed MAX6650 fan speed readings
- added full support for NVIDIA SMBus on nForce chipsets
- enabled SMBus Block Operations for all SiS chipsets
- added HOW TO SEND A REPORT help topic
- SEND REPORT now asks for basic info on fan speed changing ability for your motherboard
- updated the help file for S.M.A.R.T.
- fixed a minor problem with the REMEMBER IT checkbox in the ADVANCED tab of the CONFIGURATION dialog
- user selected properties for each sensor chip are properly restored after SUSPEND
- updated the help file for the INFO tab
- added preliminary support for W83L785R
- finally managed to enable ADM1025 monitoring!
- forced IT8693F starting monitoring, if needed
- added preliminary ASUS VIDEO CARDs support under Win2K/XP (you need the latest version of SmartDoctor installed)
- added an SMBUS DEBUG facility activated by using /SMBDEBUG command line switch (there is a full description of this feature in the help file)
- WANTED and WARNING temperatures shown in CONFIGURATION dialog are now shown both in Celsius and in Fahrenheit
- finally fixed MSI KT3 Ultra hanging while scanning SMBus
- the installer should no longer abort if unable to change SERVICE startup mode
- enabled accessing WINBOND chips located at unusual ISA addresses
- trying to enable W83697HF if disabled
- added preliminary detection for LM86
- added preliminary detection for LM90

----------
Тень превращается в фантазии, таящиеся в глубине вашей души.
Пока идёшь ты среди теней, да не будет зла с тобой.

Модерирует : gyra, Maz
Версия для печати • Подписаться • Добавить в закладки
Страницы: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56